Noise is regarded as a kind of environmental pollution in daily life and it have a certain impact on people's life and sleep. Different degrees of movement of the medium in the pipe will also produce noise. Pumps are the main equipment for increasing water pressure. It makes a lot of noise in the inlet and outlet of the pump, so we often install a rubber soft joint at the inlet and outlet of the pump to control and reduce the vibration and noise it produces.

 

There are many forms of sound generated by the pump during its operation, and the most serious of one is the sonar radiation generated by the structure of the pipe. In addition to the noise generated by the fluid medium in the pipe, all the other vibration noise is the mechanical power produced by the pump operation.  So in order to control and reduce the noise of the pump, it is necessary to control the transmission of the pump source to solve the recurrence of this kind of problem. The basic principle of the rubber soft joint control to reduce the noise of the pump is to use the elasticity of rubber to make the pump outlet and the pipe. By using flexible rubber joint, the vibration source is cut off directly, hence, the vibration and sound transmission between pump and pipe is cut off. Single ball rubber joint, double ball rubber joint and three ball rubber joint can be installed according to the vibration amplitude of water pump. The more sphere the flexible rubber joint, the better the vibration absorption and the lower the vibration sound of the pipe.   

 

Rubber joints are used in the inlet and outlet of the pump to effectively reduce the vibration and noise generated by the pump during its operation. These are the experts of Xinli Technology Department who taught you how to control and reduce the vibration and noise generated by the pump. I hope it can solve your troubles in this respect and make your life more happy, warm, comfortable and quiet.