Thread Union Rubber JointKST-L SS Union EPDM Rubber Expansion Joint

Your Location：Home > PRODUCTS > Rubber Expansion Joint > Thread Union Rubber Joint

KST-L SS Union EPDM Rubber Expansion Joint

  • thread union rubber joint 1
  • Rubber Bellows Joints
  • Rubber expansion bellows
  • Thread Rubber Bellows
  • thread union rubber joint 1
  • Rubber Bellows Joints
  • Rubber expansion bellows
  • Thread Rubber Bellows
  • [Name]: Thread rubber expansion bellows joint
  • [PN]: 0.6-2.5mpa
  • [Medium]: Air, water, seawater, oil, slurry, weak acid, alkali, etc.
  • [Material]: NR, NBR, CR, EPDM, PTFE etc.
  • [Certification]: ISO9001:2008
  • [Products]:Rubber Bellows Joints, Rubber expansion bellows, Thread Rubber Bellows

We're here to help:Easy ways to get the answers you need.

Inquiry

Inquiry

  • Name:*
  • Email:*
  • Tel:
  • Message: *
  • Overview
  • Features
  • Specification
  • Order Instruction
  • Online Inquiry

      Screwed type flexible rubber joints are designed to absorb movements and stress on piping systems, compensate for pipe misalignment, reduce vibration and system noise, protect against start-up forces as well as system surges. Thus, they are also called shock absorbers, pipe compensators, flexible connectors, etc.

       Thread union type rubber joint features small volume, small weight, good flexibility, easy installation and maintenance. Angular deflection can be up to 45°.

      Pipe tee joints  consist of fabric reinforced and matal flange loose joint,used on shock decrease, compensate for displacement.KDF means flanging high pressure rubber joint JGD dual ball rubber joint,JGD-B threaded dual ball joint,which have functioin as high flexiblity,resistance to media and climate , also called rubber joint , shock absorber, pipe shock aborber , but all mean high pressure flexible rubber joint.

      Flexible joints introduction: 

      1. This product can greatly reduce pipeline system shock and noise. And can fundamentally resolve pipe joints displacement, axial stretch and non-concentricity.

      2. By using different materials, it can be made many kinds to cater for different medium and environment. Such as acid resistance, alkali resistance, corrosion resistance, oil resistance and heat resistance etc.

      3. The material is pure rubber, sealing is very good. It is in light weight, very easy for installation . This product has long life performance, but must be not contact with sharp metal instruments to avoid piercing the sphere. 

      4. The product can be used for lift and transportation of raw water and sewage, transportation of water supply cooling cycle water thermal power ,condensate water of metallurgy industry and chemical industry.

    Working pressure Mpa (kgf/cm2)

    1．0 (10)

    Angular deflection

    45°

    Explosion pressure Mpa (kgf/cm2)

    3.0 (30)

    Vacuum Kpa (mm/Hg)

    53.3 (400)

    Applicable Temperature

    -15℃-115℃(-30℃-250℃ under special conditions)

    Applicable media

    water, sea water, hot water, air, compressed air, oil, acid, alkali and so on

     

    Technical parameters of rubber bellows joints

     

    No. Part Material
    1 Body NR, CR, IIR, NBR, FKM, EPDM
    2  Inner & Outer Rubber NR CR IIR NR FKM EPDM PTFE
    3 Body Carcass Nylon cord fabric
    4 Reinforcing Ring Multi-strand coppering steel wire
    5 threaded union rubber joint Cast and forged carbon steel(Q235), Stainless steel(201, 304, 316, 321), Plastic(CPVC, PVDF, PPH, UPVC, RPP)

     

    Technical parameters

     

    Item |Medol KST-L-10 KST-L-16  
    If media is oil, acid or alkali, please inform us special requirements for working temperature and OEM orders with drawings or samples when ordering.
    MpaWoring pressure 1.0(10) 1.6(16)
    Mpa Burst Pressure 2.0(20) 3.0(30))
    Kpa Vacuum 53.3(400) 86.7(650)
    Applicable Temperature -20℃~+115℃(-30℃~+250℃ under special conditions)
    Applicable Medium Air, compressed air, water, sea water, oil, acid, alkali, etc.
    Note: the materials of main parts are the same with those of KXT type

     

    Main date

     


    Nominal Diameter
    （mm）    		 LengthLmm Axial displacement mm Haorizontal isplacement mm Angular deflection(a1+a2)°
    mm

    inch

    		 A型 B型 Extension Compression
    15 0.5 180 200 5 10 20 45
    20 0.75 200 200 5 10 20 45
    25 1 210 200 5 10 20 45
    32 1.25 210 200 5 10 20 45
    40 1.5 220 200 5 10 20 45
    50 2 220 220 5 10 20 45
    65 2.5 240 240 5 10 20 45
    80 3 285 285 5 10 20 45

    Notes:1. For OEM orders with special requirement, threaded rubber expansion bellows should be made according to customers' drawings. Thread standard can be ISO, ASME, BS, JIS, etc. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc.

     

    For more accurate quotation pls send us more details about the products you need:

    1. What's the DN and PN?

    2. What's the material?

    3. What's the connection(flange or thread)?

    4. What's the standard(ANSI, DIN, BS, JIS)?

    5. What's the medium working with?


    Purchase process
    Leave Messages Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
    • *
    • *
    • *
Recommend Star Products
KST-L Cast iron Union EPDM Rubbe
KST-L Cast iron Union EPDM Rubbe
KST-L SS Union EPDM Rubber Expan
KST-L SS Union EPDM Rubber Expan